Installation Guide

VeyraShade products are designed for homeowner installation. Your shipment includes mounting hardware and product-specific instructions. Allow about 20–45 minutes per window for a first-time install, depending on product type.

Before you start

Tools you'll typically need

General steps

1. Mark bracket positions

Use your approved mount type (inside or outside). Level the headrail or brackets before marking screw holes.

2. Mount hardware

Install brackets or a mounting plate per the included diagram. Do not overtighten — brackets should sit flush and secure.

3. Snap in the shade

Most roller, zebra, honeycomb, and roman shades clip or slide into the mounted brackets. Test lift and lower before final adjustments.

4. Program motors (if applicable)

Motorized shades: set upper and lower limits per instructions, pair remotes or apps, and connect smart home protocols if ordered.

Product-specific notes

Roller / Zebra / Roman

Valance covers may install separately. Cordless models have tension settings — follow the included guide for smooth operation.

Honeycomb

Recessed mounts sit flush in the frame — confirm depth before screwing brackets. Day & night dual fabrics have two independent sections.

Dream Shades

Vane alignment and motor pairing are covered in the motor instruction sheet. Allow extra time for wide spans.

Motorized Drapery

Track mounts to wall or ceiling. Plan stack-back clearance at each end. Curtain panels may ship separately from the track.

After installation

Operate each shade through its full range once. For care and cleaning, see our warranty & care page.

Questions during install? Email support@veyrashade.com with your order reference and photos if helpful.